This procedure works for 2007-2013 Tahoes/Suburbans/Yukons:
To remove the rear wiper assembly open the plastic cover to expose the 13mm nut securing the arm to the spindle. Disconnect the washer hose from the grommet protruding from the liftgate. Using even pressure, apply outward force behind the attachment point of the washer arm to the spindle. I used a 17mm crescent wrench and tapped on the top and bottom. Then I pried gently at 12, 3, 6, and 9 o'clock and it finally started to move. I repeated that with a steady force until the arm detached from the spindle. If you have a puller you can also use that but a crescent wrench works just fine for the shadetree mechanics among us.
I've got a better question, why is this question in the Chevy venture forum ?
To remove the front grill on a 2007 Chevrolet Tahoe the bumper will need to be removed first. After the bumper is removed, take off the four screws and clips holding the grill in place. The grill is then ready to remove.
6x5.5
que aceite lleva el motor de tahoe "What kind of motor oil does a 2007 Chevy Tahoe use?"
Replace
big
H11
8200 lbs
Dont think so. Its a different size truck as far as interior goes.
i does not have a control i need to replaced it
Fram PH10060
Need firing order on a 2007 Tahoe with a 5.3 liter motor?