Want this question answered?
how do i let diwn the back seat of a jaguar
How can remove the rear seat on a 1990 mercury sable
well the first thing is to remove the lower seat. It has two clips near the front of it . Remove the lower seat now. Next remove the side panel right above the back seat. Now you have to remove the bolts for the seat belts, it holds the back part of the seat in. move the back part of the seat up towards the back window. You should hear the seat come loose. Now when you put the seat back in don't forget to pull the seat belts back though.
Remove the back seat.
Move seat back, remove bolts at the front of the chair slide rails. Then move the seat forward and remove the bolts at the rear of the seat slide rails. Disconnect control connections (Lumbar, heater etc)
If it is the new body style 1999 truck, you will need a 15 and an 18 socket. Slide the seat all the way forward to remove the back bolts, slide the seat all the way back to remove the front bolts , unplug the seat belt sensor and lift the seat out.
mine is a 1992 xj6 and it will have 1 screw at each end of the seat which are easy to see if you look by the foot well.remove them and that's it.
The back seat removes. Under the right and left seat there are buttons you push and the seat should remove.
there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove
how to remove 2004 scion back seat
Push and lift to release the two retaining clips located on the front bottom edge of the seat. Remove the 10mm bolt retaining the center rear of the seat.
To remove the back seat of a Skylark, reach into the area between the back and the seat and pull up on the seat. The back part of the seat is bolted in and will require a socket wrench to remove.