Remove the screw on the panel below the front of the seat. Then open the seat and remove the two Phillips type screws near the seat hinge. Then remove the panel below the front of the seat and have a look. You can also take the storage container right out if you want to get in deeper.
Can you show a diagram of where the Yamaha vino battery location
A person can remove the seat on Yamaha BW350 motorcycle by depressing the release under the edge of the seat. The seat can then be raised and removed from the bike.
The Yamaha 1200 motorcycle seat is held in place by four retaining bolts. Remove the retaining bolts and the seat will come off.
the max load for my 49cc Vino is about 5 kg (11Lb) in terms of storage capacity under the seat. In terms of the person, the MAX is about 386Lbs.
remove exhaust pipe from head , and leave the washer out thats at frt of the pipe.
The seat on a Yamaha BW80 motorcycle is removed by taking out the retaining screws under the lip of the seat. It can then be raised up and detached from the hinges.
remove seat virago 1100 1998
Yamalube from a Yamaha dealer
Remove a bolt (hex) from either side at the bottom of the seat. Near the shock.
Remove the 10mm bolt from behing the rear seat. Then pull the rear seat it hooks to the front seat in the front. Remove the bracket there and pull the front.
key unlocks top section(pillion) which exposes nuts at the rear of main seat. unscrew and slide seat backwards, this will remove the seat.