www.links4jeeps.com/writeups/softtop/
If you go to the link above, there is step by step instructions with pictures to accompany the instructions. I hope this helps you. Good luck!
I have a 00 wrangler, these directions helped me tremendously!
A hard top or soft top?
nope, you have to remove the hard top first.
Yes.. the body already has the mounting holes for the top. I originally bought my Jeep with soft top and then got a used hardtop. No issues - just be sure to remove the soft top mounting hardware.
No TJ tops will not fit on a YJ
you should always remove the soft top before putting on the hardtop
Fold the soft top down, Remove 4 torx bolts from the bows and remove them from the brackets on the roll cage. Pull the entire top away from the vehicle to the rear.
The details - too involved to go into here - are in the user manual
to lower the top, no, they will fold up, but to avoid creasing the windows it is good to remove them first
just pull out the fromt and unzip the back (1998 soft top)
You will need to remove the soft top hardware first. There will be 6 star hex bolts. You take them off and you should be able to remove the hardware. You will be down to metal on the sides. You will then be able to slide the hard top on and lock it in the front just like the softtop locked in. You will then have to put the bolts back on.
First U have to Unhook and Remove The Fabric cover Start by Removing the windows Usually they zipper on. Then Unhook It From the windshield it Sorta Just Clips Into Grooves in the hardware Once the Fabric is Removed then u have to Unbolt And Remove all the Soft top Hardware
no