righty tighty lefty loosey... are you kidding me? if somethings in the way move it then put it back replace wires on same plugs if that's too difficult most mechanics will do it for under 60 dollars in about 15 minutes
SPARK PLUG GAP1999 Subaru Truck Forester AWD 2.5L MFI 4cylThe Spark Plug Gap.044 (In thousandths of an inch)
you have to remove the washer bottle and the battery and the air duct then remove the coil packs then spark plugs easy
Get a spark plug socket and wrench that fits the plug body and remove it by turning counter-clockwise.
The spark plug gap for a 1995 Subaru Legacy is .044"
Changing spark plugs on a Subaru is no different from changing spark plugs on any other car. You may have to remove parts of the air induction system to make access easier. Be sure to check the gap on the new ones and use anti-seize on the threads.
If you have no spark on the 1991 Subaru Legacy, you should check the spark plugs and spark plug wires for replacement. You should also check the battery and ignition for replacement.
The spark plug gap, for your 2000 Subaru 2.5 liter engine, is .007. Most spark plugs will be pre-gapped by the spark plug manufacturer.
The spark plug gap for a 1998 Subaru Impreza/Legacy with the 2.5L DOHC engine is .044".
there are lots of differant kinds, what year make model?
they are located on the side of the motor probably a 12mm bolt it is tight job might want to remove air box and battery to do this
Generally, to replace spark plugs on a Subaru vehicle, the spark plug boot should be removed. Then, the old spark plugs should be removed using a socket wrench, and replaced with new ones.
Need to know more ~what motor? 4 or 6 cyl. would it be similar to the '02 model H6? I just replace my plugs. dne' Is it this motor? [IMG]http://img.photobucket.com/albums/v417/Denee/IMG_5573.jpg[/IMG]