5/8 plug wrench
try changing plugs and wires then move to coils. if not there it could be and o2 sensor.
with a spark plug sockett
The fuel/air adjustments on these carbs are factory sealed and cannot be adjusted. There have been many that have drilled these plugs out and attempted to make the adjustments but, I just can't recall anyone that was successful in performing this procedure. In the end, they had to have them replaced.
remove the coil pack; use a jointed extension with sparkplug socket to reach plugs.
to remove the front plugs, first remove the plastic cover that is next to the small heat sink. then remove the next plastic panel. the plugs have no wires, but have boots around them. the first 3 are forward facing and are relatively easy to remove. the other 3 are in the rear and are significantly more difficult to access. Then use a plug wrench to remove plugs and replace with new plugs.
where would the spark plugs at on a Oldsmobile 1989 engine
Remove the four bolts on the cover plate and lift straight up exposing the wiresets.
how do change the spark plugs and the coil pack on a 2000 Oldsmobile intrigue
It is but is easier if you remove the brace between the two strut towers
http://www.buicks.net/shop/tuneup.html
Yes
9