To remove the started on a Polaris 300 Explorer ATV first open the hood. Locate the started which will be up against the wall near the driver's side and remove the screws. You can now install a new started.
Remove the cables from the starter. Remove the starter retaining bolts. The starter will come off. Reverse the process to install the new starter.
Disconnect the positive cable from the battery. Disconnect the cables from the starter. Remove the starter retaining bolts. Pull the starter out.
Remove the starter cables. Remove the starter retaining bolts. The starter will come off. Reverse the process to install the new starter.
On the very bottom between primary & secondary.
Pull the throttle body for direct access to the starter. Had mine out in 30 minutes
not sure
You have to pull the front clutch off to get to the rest of the bolts...
How can i install a starter on a 2002 polaris 325 magaum
MOST LIKELY YOU WILL NEED A HOIST TO EVEN SEE THE STARTER
How do I replace the starter on my polaris 250 4x4 Model number is EC250PF00802151. How do I change the stater on a 99 polaris explorer 4x4
take off the skid plate and there should onley be 3 bolts holding it in place and it slides right out and polaris had a recall on those