I hate to tell you this but you have to take the header loose from the manifold to get the starter out, it's a real bear to get out and back in, if you have to replace the starter I would suggest that you buy the small Chrysler starter that is offered from summit racing or Jeggs.
You will have to remove the engine.
remove the wires from the starter and then the 2 bolts that hold it to the engine and it will come out as long as there is room without the exhaust manifolds or headers being in the way, if their in the way they have to be removed also.
Locate the starter at the rear of the engine on the passenger's side. Unplug the wiring. Remove the bolts that hold the starter. Remove the starter.
remove neg.cable.then positive cable cable from starter,remove male to female wire ,then remove 2 bolts holding starter to engine.
For the ones on the side you may have to remove the engine mount or starter. For the ones on the back you will have to remove the transmission.For the ones on the side you may have to remove the engine mount or starter. For the ones on the back you will have to remove the transmission.
how to remove the starter from a 92 s-10 4x2 with a 2.8 engine
Disconnect the - battery cable Raise and support vehicle Remove wiring at top of starter Remove starter mounting bolts Remove starter
remove plastic engine cover on right side of engine . on top of starter is the battery nut . remove carefully making sure the stud does not spin . then remove 2 bolts at rear of starter . gentlly pull starter out of mount .
Remove wiring remove the 2 bolts holding the starter to the engine,remove the starter,you might want to remove the air filterhousing and inlet hose.
how to remove starter on 1996 chevrolet 2500 with 6.5 diesel engine
Disconnect the negative battery cable from the battery, remove the two bolts from the starter, drop the starter enough to disconnect the wires from it and remove the starter from the engine.
Disconnect the - battery cable Raise and support vehicle Disconnect wiring at top of starter Remove starter mounting bolts Remove starter