Want this question answered?
Right behind the solenoid. Have to feel for it of use mirror.
In a Ford 4610, you need to add the hydraulic fluid to the rear axle. The Ford 4610 is a 1989 tractor that retailed at close to $19,000.
The oil tube on a 4610 Ford Tractor is located under the hood. There is an oil stick included to help check the level of the oil.
right by the oil
in the back axle
Remove - battery cable Raise and support vehicle Remove wiring at top of starter Remove starter mounting bolts Remove starter
i have a 1988 4610su II same engine as 4610 theres a site tractor data that answers alot of questions about tractors all makes and models it says the engine oil cap for the 4610 is 7 quarts the orginal oil was a straight 30 wgt but 15w40 is also reccommended and is what most farmers ar now using due to better starting in cold weather hope this helps have a good day
Disconnect the - battery cable Remove wire at top of starter Remove Starter mounting bolts Remove starter
Remove - battery cable Raise and support vehicle Remove wiring at top of starter Remove starter mounting bolts Remove starter
Remove - battery cable Raise and support vehicle Remove wiring at top of starter Remove starter mounting bolts Remove starter
Disconnect the battery. Remove the H.D cable and starter solenoid wire from the starter motor, remove the bolts from underneath, remove the starter. BigBronco351
Begin by removing the positive cable from your battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new Ford starter.