remove wires from the top of starter, remove the two bolts that attach starter to bell housing, pull starter off, reverse to put starter back on
1. unhook neg. battery lead. DO NOT SKIP THIS STEP 2. unbolt large power wire from starter. 3. unplug wires from solinod on starter. 4. remove bolts (2) that hold starter to trans. %. remove starter, replace and reverse steps
In general, remove negative cable from battery, remove electrical wires from starter, remove bolts holding starter in place, remove starter. Replace starter in reverse order.
Remove - battery cable Raise and support vehicle Remove wiring at top of starter Remove starter mounting bolts Remove starter
disconnect power from battery, remove wires connected to starter, remove bolts from starter (usually 2), remove starter.
Disconnect the - battery cable Raise and support vehicle Remove wiring at top of starter Remove starter mounting bolts Remove starter Disconnect the - battery cable Raise and support vehicle Remove wiring at top of starter Remove starter mounting bolts Remove starter
Remove the cables from the starter. Remove the starter retaining bolts. The starter will come off. Reverse the process to install the new starter.
Disconnect the - battery cable Remove wire at top of starter Remove Starter mounting bolts Remove starter
Remove - battery cable Raise and support vehicle Remove wiring at top of starter Remove starter mounting bolts Remove starter
Locate the starter at the rear of the engine on the passenger's side. Unplug the wiring. Remove the bolts that hold the starter. Remove the starter.
You have to remove the exhaust manifold to get to the starter.
Remove - battery cable Raise and support vehicle Remove wiring at top of starter Remove starter mounting bolts Remove starter