One way to remove string that has gotten tangled around a washing machine is to wind it in the reverse direction. However, a repairman may have to be called if it is interfering with the operation of the machine.
put milk in front of the machine. If actually stuck tip machine forward.
soak in a drop of cola
Because if you put a pen in in a coat in to the washing machine the pen will be stuck to it and walla you have it the pen stuck to the coat and the coat is clean to
The eye is trying to remove the source of irritation by washing it away.
The water cut off device is stuck in the full position. -You don't say what kind of machine, or else I could tell you how to fix it.
There is not an insect known as the tooth insect. If you have an insect stuck in your teeth you can use dental floss to remove it and washing your mouth out with warm salt water.
See if there is something stuck in the pipes that is clogging it up and causing this to happen.
If it is stuck on the spindle, then you must destroy it to get it off by prying it off and use a cutting wheel to split the race and cold chisel to remove the final piece. Be very careful not to damage the spindle or hub when removing stuck bearings or races. You could try using a 2, 3, or 4-jaw puller to remove stuck wheel bearings, or if they're stuck in the hub take the hub to a machine shop for removal. Chances are, if the bearings are so stuck that a machine shop has to remove them, you'll need new races installed at the machine shop anyways. If you mean that the hub assembly is stuck to the steering knuckle after removing all of the bolts (usually 4), just tap the hub assembly on the sides with a hammer and it should break free. Then you need to use a puller to pull the assembly off of the driveaxle.
Did you mean "why won't it drain"? The machine could have a damaged pump or a clogged drain. The pump can get damaged if small clothing gets stuck in it. Check the pump area and remove small clothes such as socks and undergarments. If it is clogged, try cleaning the machine. Treat the drain with a vinegar and baking soda solution. This solution helps get rid of collected dirt, molds and hard minerals.
what it it stuck on?
get it out
Have you checked to see if the machine is able to spin freely? You may have a screw or other object preventing the tub from spinning and as a result the belt gets stuck in one place and the motor keeps running making it melt.