using an old fashion razor blade cut them off then clean area with methelated spirits.
Use isopropyl alcohol to weaken the tape holding the original badge on. This will not damage the paint. Wipe tank clean and ensure all residue is removed. Use string like a plumbob to measure the position on each side of the tank at the front and back of the new badges from the centre of the tank (over the top) Do the same to position the front of the new badge by going around the front of the tank to ensure each badge is the same distance from the front centre point. Carefully affix the new badges
It is in the fuel tank. You have to remove the tank to accessIt is in the fuel tank. You have to remove the tank to access
You will have to remove the tank and flush it out.
Remove fuel tank from vehicle and then remove fuel pump from tank.
how can i remove tank emblem from my hatley
On z31 its located in the gas tank, you need to remove the tank. Z32, you don't have to remove the tank but you have to remove the panels in the trunk to access it from the top of the tank.
Easiest way is to remove the bed. Then you can remove it without dropping the tank.
In order to remove the fuel pump you must remove the gas tank.
Follow the fuel lines from the front to the fuel tank. The fuel pump is connected to the tank. You'll have to remove the tank to remove the pump. Follow the fuel lines from the front to the fuel tank. The fuel pump is connected to the tank. You'll have to remove the tank to remove the pump.
remove the wiring going to the front of the tank, and then remove the bolts from the 2 straps holding the tank up and it's out.
Easiest way is to remove the bed. Then you can remove it without dropping the tank.
You have to remove the fuel tank.You have to remove the fuel tank.