You need to remove the plastic bezel around the radio and the steering wheel. Be careful as this part is very fragile and is connected to the car by several clips. Once that is removed just unscrew the screws attaching the radio to the dash and pull the radio out. Note: if you are installing a different CD player/radio...you will need a conversion kit, wiring harness, and antenna extension.
You will need to remove the front engine cover, on your 1997 Pontiac Bonneville, in order to change the supercharger belt. Loosen the tensioner pulley to remove the belt.
locate blend door actuator for 1997 pontiac bonneville se
Begin by training the water from your 1997 Pontiac Bonneville cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Begin by removing the wiring harness from the back of your 1997 Pontiac Bonneville headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight.
your back end
The rotor thickness for your 1997 Pontiac Bonneville is 0.75. When the rotor falls below this thickness a certified mechanic can no longer use the rotor.
A person can find a wiring diagram for a 1997 Pontiac Bonneville at most GM dealerships. The dealerships are happy to help customers with any requests.
The Autolite website lists a gap size of .060 the 1997 Pontiac Bonneville.
go to www.kellybluebook.com and it will tell you the value
http://www.autorepairmanuals.biz/
The blower motor on a 1997 Pontiac Bonneville is located next the evaporator core. It will be mounted behind the glovebox on the passenger side of the vehicle. Remove the glovebox, mounting hardware, and sensor clips. The blower motor will be able to be replaced.
The 1997 Pontiac Bonneville has a coolant capacity of 5.6 gallons. The manufacturer recommends that 50 percent of your coolant should be anti-freeze.