answersLogoWhite

0


Best Answer

if u cant replace a bulb the u should bring it to a garage .........

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the Headlamp Bulb from a 92 Acura Integra RS?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How replace headlamps on Pontiac Sunfire 1995?

Remove the air intake splash shield from the vehicle. Remove the 2 headlamp retaining bolts. Remove the lamp assembly from the front of the vehicle. Detach the headlamp connector. Remove the headlamp bulb retaining ring. Remove the headlamp bulb from the headlamp.


How do you replace the rear side marker bulb on a 1994 Acura Integra?

From in the trunk


How do you remove headlight assembly on a 2000 Ford F-250?

Removal WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope. NOTE: The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended period of time may effect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamp with the bulb removed from the headlamp. # NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position. Disconnect the headlamp connector. # Remove the headlamp bulb. ## Rotate the headlamp bulb retainer counterclockwise one-eighth turn and remove. ## Remove the headlamp bulb.Installation CAUTION: Bulbs 9004 and 9007 look similar, but are not interchangeable. # Install the headlamp bulb. ## Install the headlamp bulb. ## Rotate the headlamp bulb retainer clockwise one-eighth turn.# Connect the headlamp connector.


How do you change the headlamp bulb on a 1991 Chevrolet caprice?

To remove the headlamp bulb on a 1991 Chevrolet Caprice simply twist the retainer counterclockwise, remove the bulb from the headlamp capsule and unplug the bulb from the wiring connector. To install the new bulb plug it into the wiring connector, insert the bulb into the headlamp capsule and twist the retainer clockwise and you're finished.


How to Changing headlight bulb 2005 ford f 250?

Removal WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope. NOTE: The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended period of time may effect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamp with the bulb removed from the headlamp. # NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position. Disconnect the headlamp connector. # Remove the headlamp bulb. ## Rotate the headlamp bulb retainer counterclockwise one-eighth turn and remove. ## Remove the headlamp bulb.Installation CAUTION: Bulbs 9004 and 9007 look similar, but are not interchangeable. # Install the headlamp bulb. ## Install the headlamp bulb. ## Rotate the headlamp bulb retainer clockwise one-eighth turn.# Connect the headlamp connector.


What brake light bulb goes in a 1991 Acura Integra?

The 1991 Acura Integra brake lamp number is 2057. See sources and related links below for a picture and more information.


How do you remove the headlight from a 1994 Acura Integra?

To remove the bulb- raise hood reach behind headlight housing grasp the bulb holder assembly and rotate counterclockwise and gently pull straight out.There are two bulbs to each headlight assembly. Note.... do not touch the new bulb lense with your fingers.The oil in your skin will cause a hole to burn in the halogen bulb. If you do touch the bulb,clean with alcohol before installing. To remove the headlamp assembly- Raise the hood and remove bumper cover screws and remaining bumper cover screws.Then remove the electrical connection from the back of assembly.Then remove the 4 screws retaining the head lamp assembly and remove the assembly.


How do you replace the headlight assembly on a 2000 Dodge Caravan?

Open hood, remove headlamp bulb from headlamp assembly, remove (1) 10mm bolt from top of headlamp assembly, next remove (3) 10mm bolts from behind headlamp assembly, pull headlamp forward ( you may have to pry gently from the right side). Remove turn signal bulb-Done!


How do you change a headlight bulb on a 2009 Malibu?

you need to remove the front fascia to remove the headlamp to change the bulb


Why does the drive dash light not come on when in drive on a 1990 acura integra?

it may need a new bulb


How do you remove the headlight lens on a 2000 Pontiac grand prix?

Remove the (2) two headlamp assembly bolts from the upper fascia support. Slide the headlamp assembly outward enough to release the headlamp bracket tabs from the slots in the upper fascia support. Position the headlamp assembly away from the vehicle body to access the electrical connector. Disconnect the electrical connector from the headlamp assembly. Remove the headlamp assembly from the vehicle. If you wish to change the halogen bulb: Disconnect the electrical connector from the headlamp bulb/socket. Remove the headlamp bulb/socket retainer ring from the headlamp, by turning counterclockwise. Remove the headlamp bulb/socket from the headlamp assembly. Hope this helps. G These instructions are similar from around '96 to '03 grand prix model years.


How do you change the driver side front turn signal bulb on a 2000 Acura TL?

Turn Signal removal '01 Acura TL Simply remove the fender liner from its usual area around the front wheel, this will give you easy access to the turn signal bulb in the headlamp assembly.