0
To remove the bulb- raise hood reach behind headlight housing grasp the bulb holder assembly and rotate counterclockwise and gently pull straight out.There are two bulbs to each headlight assembly. Note.... do not touch the new bulb lense with your fingers.The oil in your skin will cause a hole to burn in the halogen bulb. If you do touch the bulb,clean with alcohol before installing. To remove the headlamp assembly- Raise the hood and remove bumper cover screws and remaining bumper cover screws.Then remove the electrical connection from the back of assembly.Then remove the 4 screws retaining the head lamp assembly and remove the assembly.
What else can I help you with?
How do you remove an axle from a 1994 Acura Integra?
a hammer
How do you remove the distributor rotor from a 1994 Acura Integra?
Remove the bolts that hold the distributor cap onto the distributor. Once this is off the rotor can be reached and replaced on a 1994 Acura Integra.
Does the 1998 Acura integra bumper to a 1994 Acura integra?
Yes it will fit
Where is the problem if your 1994 Acura Integra LS front left headlight is out and changing the bulb didn't work?
check the fuse
What direction do you turn remove crankshaft bolt 1994 acura integra?
Counter Clockwise.
Can you put an 1997 Acura Integra motor into a 1994 Acura Integra?
Yes it will fit.
How do you remove the back seats from a 1994 Acura Integra gsr?
The back seats on a 1994 Acura Integra are mounted on bracket that attach to the body of the vehicle. Push the back of the seat down and loosen all the bracket bolts. Pull the seats out.
Does a 1994 Acura Integra have a firewall?
Yes it does.
Where is the turn signal flasher relay on a 1994 Acura Integra?
where is the flasher relay located 94 acura integra
What type of freon goes in a 1994 Acura Integra ls?
According the 1994 Acura Integra LS manual, recharge the system with Refrigerant HFC-134a (R-134a)
Removal of front lug studs on a 94 Acura Integra?
Lug studs on a 1994 Acura Integra is pressed into the hub. To remove the lug studs safely raise and prop the car. Remove the wheel, brake components, and suspension parts from the hub. Press out the old studs.
What is the horsepower of a stock 1994 Acura Integra ls?
140
