how do you replace a CV joint on a 1992 Chevy pickup?
== == == ==
Is there a speed senor for my 1992 nissan 2.4L, wheel drive truck?
about 3 hours
You will need to remove the tire and wheel from your 1992 Nissan Stanza. Remove the brake pad spring and caliper. The brake assembly will come off. Reverse the process to install the new brake pads.
According to Champion spark plug applications, the correct gap for 1992 Nissan pickup 2.4L engine is .044
Changing brakes is a pretty simple task. Lift the car, remove the tire, brake shoe/caliper and remove the old pad. Put in the new pad, replace the brake shoe/caliper, put the tire back on and lower the car.
jasper engines and transmission.com
screwed into front of transmission.
weak battery or bad alternator.
Yes, a 1992 Nissan Pathfinder with a V6 engine will bolt up to a 1985 Nissan King Cab 4x4 pickup truck. You just need to purchase an adapter from your local auto/towing store.
Drop the fuel tank or remove the bed.
Per Chilton's, fuel pump is located in the gas tank.
insid ac box at floor board.
in back of the alt you can fill it but can not see it take alt out of way to get to it
depends on what motor is in both of them are they both 4cyle or 6cyle
disconnect neg.cable,then disconnect pos. cable from starter ,then other wire,then remove 2 bolts holding starter to engine.
It can cost up to about 2000 dollars to replace the clutch in the 1992 Toyota pickup. This varies with the type of parts required and with where you are located.
Remove the water supply hoses from your 1992 Chevy S 10 pickup truck heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
which is the biggest mountain country stop social
i need to know how to replace the heater core on my 1992 s-10 pickup
get a haynes repair manual from auto zone or auto parts store,about 25.00.
you can't. You have to replace the whole headlight assembly, it doesn't come apart. check the junk yards or eBay it's cheaper.