Want this question answered?
Push and lift to release the two retaining clips located on the front bottom edge of the seat. Remove the 10mm bolt retaining the center rear of the seat.
It is located between the back seat and the spare tire hole remove 4 screws for the cover plate and your there .
Remove the four bolts on the bottom of the seat back and the 2 bolts on each headrest. Take out the headrests. Lift straight up.
How can remove the rear seat on a 1990 mercury sable
well the first thing is to remove the lower seat. It has two clips near the front of it . Remove the lower seat now. Next remove the side panel right above the back seat. Now you have to remove the bolts for the seat belts, it holds the back part of the seat in. move the back part of the seat up towards the back window. You should hear the seat come loose. Now when you put the seat back in don't forget to pull the seat belts back though.
Remove the back seat.
There should be four bolts under the seat, move the seat all the way back then take the front two out than move it all the way forward and remove the back two, after that unhook any wires there are connected
If it is the new body style 1999 truck, you will need a 15 and an 18 socket. Slide the seat all the way forward to remove the back bolts, slide the seat all the way back to remove the front bolts , unplug the seat belt sensor and lift the seat out.
The fuel relay is located in the back of the rear seat. Open the Trunk, remove the cover from the trunk the cover the back of the seat. and there is your trunk relay.
The back seats on a 1994 Acura Integra are mounted on bracket that attach to the body of the vehicle. Push the back of the seat down and loosen all the bracket bolts. Pull the seats out.
The OBDII plug (male) in a 1999 Acura TL is located under the radio near the seat heater switches. It is behind a small plastic cover that you remove by reaching over the top and giving a gentle pull.
The back seat removes. Under the right and left seat there are buttons you push and the seat should remove.