There are 2 latches. usually black, behind the seat on each side. Press them down then lift the back up first. Once you get the back up you can slide the seat back a little to release the front of the latches.
When you want drop a lot of heavy loads and need to pull it out, just yank it out.
It has two bench seats and two front bucket seats. therefore having 4 seats and sitting 7 people comfortably. Plenty of room in the back for any storage.
You reach over the top, or Jack the van up and reach them from underneath.
My 1998 PLYMOUTH GRAND VOYAGER has 2 pumps one for the front and one for the back. They are both located in the bottom of the reservoir.
To remove the headrest on a 1994 Plymouth Voyager Van, push the headrest all the way down. Then gently push the headrest back and pull straight up. Some seat models also have a lever on the side of the seat to depress to remove the headrest.
remove the wheels, then the drums and brake sfoes. There are 4 bolts that hold the hubs onto the axel. Make sure to replace the shims if present when replacing it.
It is in the exhaust manifold on the back of the engine.
Pull the cup holder out. Reach back, and at the top rear, center-left, is a tab. Press the tab down and pull out on the cup holder to remove it.
Remove the item from the back which is preventing it from closing. Let's face it, you need to describe a little better why it isn't closing if you want a real answer
under the hod driver side back with the firewall
try the brake switch on the back of the brake pedal
Yes it is on passenger side on back side of the intake manifold