That requires a special puller to get it off. It is pressed on.
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
On most newer cars, the crank pulley is one piece with the harmonic balancer.... Remove it with a harmonic balancer puller.
How do you replace gas tank straps for 1967 chevelle Malibu
take off the serpentine belt and crank pulley and you will need a harmonic balancer pulley to get it off.
Remove belt,4 pulley bolts and remove pulley. Remove harmonic balancer bolt and washer,reinstall bolt with out washer,just in about half way.You will need a harmonic balancer puller.These are not very expensive about $20.00 or borrow one from somebody.You just thread the correct included bolts into the balancer where you removed the pulley bolts and will be pushing on the reinstalled balancer bolt.The balancer should clear the bolt head without the washer.This is so you don't damage the threads in the crankshaft.
Go to Autozone and tell them u need a harmonic balancer puller
You need to get a special harmonic balancer pulley. You can rent them from AutoZone for $70 (you get it back when you return it)...a normal harmonic balancer pulley WILL NOT work. Chrysler vehicles have their own pulley. It's a fairly simple procedure once you have the right pulley.
Remove belt, remove crankshaft bolt with air impact tool, remove balancer pulley with a balancer puller. Then you will be able to get to it.
You need a pulley puller.
yes
disconnect the battery, remove the bolt in the center of the pulley, then use a harmonic balancer tool to remove it
remove steering wheel and then it's pretty self explanatory.