usually you don't. Use a socket wrench with an extra long handle or "breaker bar". Turn in the direction indicated on the tensioner, and the tensioner will move enough for you to remove the belt. Once the belt is off, you can remove the tensioner if you have to.
No.
5/8 plug wrench
and your question is what?
on top of the starter
Remove transmission oil pan for access to filter and to drain fluid
in the dashboard,remove the glove box then it is just above the ecm.
whats the routing for the serpentine belt for a 1996 Oldsmobile eighty-eight? Starting at bottome of crank, it wraps around A/C, then up and around alternator, down and around power steering, then up and over tensioner pulley and water pump, then back to crank. You need to remove one of the nuts and studs on the bottom of the motor mount bracket closest to front bumper to install new belt.
Let Patrick do it!
To remove the headlight from a 1999 Oldsmobile Eighty Eight, first, open the hood and locate the headlight assembly. Disconnect the electrical connector by pressing the tab and pulling it out. Next, remove the retaining screws or clips securing the headlight assembly to the vehicle, then gently pull the assembly forward to detach it from the vehicle. Finally, replace the bulb if needed and reinstall the assembly in reverse order.
18 gallons
Chilton or Haynes book
Chilton or Haynes book