0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you remove a bolt action from a Winchester model 141 22 rifle?
Remove the stock and you will see what is keeping the bolt from sliding out.
Springfield rifle bolt removal?
on the 22 model 121 to remove the bolt, open the bolt, pull the trigger and slide the bolt to the rear.
Remove 22 mm bolt on harmonic balancer for 99 Lexus RX 300?
How do you remove cap on armrest
How do you get the bolt apart on a Cooey Model 600 22 caliber rifle?
. to remove the bolt on this model you must lower the tube assembly,there is a screw under the stock, remove stock first.
How do you remove and importantly replace the bolt in a Sterling 22 rifle?
You need to ask a gunsmith for assistance.
How do you remove bolt from 551 remington 22 rifle?
Retract the bolt action to it's furthest open position. Pull the trigger which will release the bolt retaining latch, allowing the bolt to be removed from the rifle.
How do you remove the bolt on a revelation model 105 22 cal?
make sure the gun is nit loaded and remove clip.open the bolt all the way then pull the trigger with one hand and give the bolt a slight tug pulling back and it should slip out
How do you remove the bolt from a Stevens model 62 22 Lr?
You have to remove the barrel. Take the stock off and you will see the nut that holds a "U" clip in place. The clipp holds the barrell. Remove clip, slide barrel out, then the bolt will also slide out.
Remove bolt from Marlin 81-dl-22 cal rifle?
Put the safety on.....and while pulling back on the trigger (make sure gun is unloaded first) the pull the bolt rearward and remove the bolt. Putting the bolt back in is just the reverse...slide the bolt back in while pulling the trigger back first...the bolt will slide right in. JR
Value of sportco 7.62 mm match rifle?
100-500 or so
How do you remove the bolt from the action to properly clean the barrel of a Marlin Model 882 22 WMR bolt action rifle?
Move the safety forward to the 'fire' position, then open the bolt. As you are sliding the bolt to the open position, pulling the trigger will allow the bolt to be removed.
How do you remove the stock on a Winchester model 290 .22 caliber rifle?
remove the buttplate screws, and the buttplate. In the large round hole in the stock is the stock bolt. That is unscrewed to remove the stock from the rifle.
