After you remove everything required to get to it, it takes a special tool to pull it off the crankshaft.
Timing belt crank sprocket
remove engine
bottom crank sprocket dot to oil pan idle sprocket dot up both cams set v8 to top
There is a special tool ( a puller ) to remove the crankshaft sprocket.There is a special tool ( a puller ) to remove the crankshaft sprocket.
remove crank balancer pulley hub after the beltremove any thing in front of timing coverremove timing coverremove timing belt and idler and tensioner pulliesreplace all parts with newdo google search on how to align cam sprocket and crank sprocket and how to set belt tensionalign marks before belt removal and replacement
You Don't!
push in on the door pannel by the crank and remove the snap ring behind the pivit point
The Dodge Charger is a car made by Chrysler, since 1964. To change the headlights on it first remove the bumper, headlight bracket and replace the bulb, then re-install the bracket and bumper.
take it off
remove the bolts from inside the trunk in back of the taillights.
Pull out the U-clip located on the base of the window crank.
Disconnect the electrical connector, remove the mounting screw and remove the sensor.