answersLogoWhite

0


Best Answer

The thing snaps in and out. There are 6 metal slide clips holding the dash cover around the radio and air con. controls. I just pulled the cover at the bottom until those two came out, then worked my way up to the top. I had to use a screw driver gently at the middle two. Be careful not to get in a hurry during any of it or you will crack the thing. If you need to pry it I would try to pry on the inside parts if possible, not the edge or it will crack. The air con controls come out with the cover. My 2001 sedan had gray 7 pin and black 7 pin wires for the radio.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the dash faceplate covering the radio and air conditioning unit in a 2001 dodge stratus?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the poo skimmer door?

Drain the pool until the water level reaches two inches below the skimmer faceplate , remove the face plate using a screwdriver , remove the faceplate and skimmer , then replace the gasket and attach the skimmer and then the faceplate


Remove a power steering from stratus?

How can I remove a power steering pump from a 1997 dodge stratus es


How do you remove the radio in a 1974 Ford F-250 pickup?

Remove the dashboard faceplate, and the rest is pretty simple.


Can you remove faceplates on the xbox 360?

Yes you can remove the faceplate. Just stick you fingers in the USB flap, can you can pull the faceplate off. There are cool faceplates you can buy at video game stores to replace the old boring white one.


How do you remove an Xbox 360 faceplate?

Step One - First, make sure there is nothing connected or plugged into the front of the console and that the console is turned off. Step Two - There is a crack between the xbox 360 faceplate and the rest of the xbox 360 console. To remove the faceplate, gently place something like a butter knife, a credit or debit card, or even your finger nails into the crack. Step Three - After you do this, gently apply pressure on the faceplate so that you are pushing it away from the console and faceplate should pop off.


How do you remove a center dash in a 1986 Oldsmobile Cutlass Supreme to remove the stock radio?

I found the easiest way to do remove the woodgrain faceplate is to take a small scewdriver, and bend the end of it until it is hooked shaped, then put the hook behind the faceplate one corner at a time, slowly pulling out until each corner pops loose. Its the best way I know how, I have took many off this way with no damage to the faceplate.


How do you remove radio 2003 F350 Diesel?

use the removal tools in the holes on the sides of faceplate


How do you take the faceplate off of the heater and AM radio of your 1981 Buick LeSabre?

remove the screws and give it a slight tug


How do you remove a camshaft on a 1999 dodge stratus?

Hit it with a hammer


How do you replace ac compressor for c240 2002?

Remove the belt from your Mercedes-Benz 240 air conditioning compressor. Remove the air conditioning hoses. Remove the compressor retaining bolts. Reverse the process to install your new air conditioning compressor.


How does one remove radio in 1999 Mercury Grand Marquis?

remove the knobs and there are nuts under then to remove. Then take the nuts from the back of it under the dash and the wiring and remove. nice , duh If your stereo is an integrated faceplate unit (as most post-1991s are) there should be four holes on the faceplate, 2 on the left and 2 on the right. Check your local auto parts store and ask for a Ford Stereo Removal Tool Set. It consists of two "U" shaped pieces of wire with pointed tips. Insert the two wires into the holes in the stereo faceplate. When you feel them click, pull the stereo out of the dash.


How do you replace the AC compressor on a 1997 Chevy Malibu?

Remove the air conditioning hoses from your 1997 Chevy Malibu air conditioning compressor. Remove the compressor belt. Remove the compressor retaining bolts. Reverse the process to install your new air conditioning compressor.