The dash does not need to come off to install a new radio. The area where the radio is installed has its own panel that can be easily removed. Grab a flat-head screwdriver and pop the cover off (there are 4 pins that grab the panel to the dashboard body). Don't forget to unplug the plug that controls the passenger air bag light before completely removing it.
It is not necessary to remove the dash. Only necessary to remove enough of the trim pieces to get the radio out. If you look carefully you will see what needs to be removed.
what are the radio color codes for a2009 chevy impala
To hook up a radio in a 2001 chevy impala do i need the charm or can it be direct wired
Have it repaired or replace the radio. Either way, you need to remove the whole unit.....
well is it a radio wire harness because if so yes
Remove the front cover of your 1979 Chevy Corvette radio. Remove the radio retaining screws. Slide the radio out. Remove the wiring harness and the antenna cable from the back of the radio. Reverse the process to install the new radio.
yes
Installing a CB radio in a Chevy Impala begins which installing the mount and location a suitable power source. The radio is then mounted to the dash, wired up, and the antenna connected.
The radio on a 2003 Chevy Impala can be typically be fixed by replacing the fuse. If the radio does not work when powered, it will need to be replaced with a new unit.
Remove the cover from your 1986 Chevy Cavalier radio. Remove the radio retaining screws. Slide the radio out and remove the wiring harness and the antenna cable.
two orange cables
Under the hood beside the battier