This is very hard, you will need a repair book. the plastic parts are press tabs and will probably break off when you try to remove them.
Inside the instrument cluster. To replace them remove the cluster and take it apart.
Remove the instrument cluster then replace the bulbs. = =
You have to remove the dashboard, then remove the instrument cluster. On the back of the cluster, you'll find that you can unscrew the bulbs from the back and replace them. I've done it myself on my own 99 Sunfire --- CanadianCynosure
You need to remove the instrument cluster.
You will need to remove the instrument cluster board. To do that, remove the trim piece around the instrument cluster, then carefully pull the instrument cluster out of the dashboard. Note that the instrument cluster plugs in to a socket in the dashboard, so be careful as you remove the circuit board so that you do not damage the plug. Once the instrument cluster is out, replace all bulbs. They twist to remove, and if the odometer bulb has failed, the others are getting old too. It might be best to replace them all to avoid future problems.
you don't! remove bezel for gauges, remove four screws for gauge assembly, pull forward and tilt, replace the four bulbs.
We have full instruction on cluster removal and how to replace the stepper motors for the gauges. Use the search button "how to replace your stepper motors" www.trailvoy.com
remove the top trim panel off the dashboard, the front trim panel from the instrument panel and remove the screws. good luck finding a replacement cluster
Remove the vents and screws under the ac cluster speedometer cluster.
Remove the vents and screws under the ac cluster speedometer cluster.
To replace dash lights on a Mazda B 3000 first disconnect the battery and remove the dashboard. Unplug the cluster wiring and carefully remove the display. Replace the lights.
Remove the dashboard instrument cluster cover. The cover is secured with four retaining screws. Take hold of the dashboard light, push in and turn at the same time to remove it. Reverse the process to install the new dashboard light.