1. pry open the speaker grill and remove 3 Philips screws (you don't have to remove the loud speaker)2.remove 3 Philips screws that holdes the arm rest3.remowe the plastic Philips screw and remove the plastic clip4.remove the black plastic cover (that covers the mirror screws )by pulling it .5.remove the Philip screw in the door opner,push the door opner unit forward and out.open the little green clip that holds the steel rod and loosen it .remowe the El. window opner plugg.6.open the door panel with a door pray tool ( www.eastwoodco.com )When the door trim is loose ,lift it up (you don`t have to remove the door lock knob.7.remowe the loud speaker plug.
The question you ask is tooinvolved for a proper answer. You need to go to a car parts store, and get arepair manual for your car.They cost about $16.00Or, go to a Public Library.
The 1998 Honda Civic drivers side door panel is held on by eight retaining clips. Pry outward on each retaining clip to remove the door panel.
To remove the door panel from a 2003 Honda Pilot all the mounting screws must be found and removed. There will be 2 screws and 8 clips holding the panel to the door. After removing the screws the door panel will be able to be pulled off.
red light show
Remove the door panel
To remove the door panel from a 1995 Honda Accord LX sedan the mounting hardware must be unscrewed. Afterwards the mounting clips can be pulled off along with the door panel.
I HAVE SAME PROBLEM. WHAT DO YOU DO? firstname.lastname@example.org THANKS, BJ
The 1998 Ford Ranger door panel has eight retaining clips. Pry outward on each retaining clip. Remove the two door handle screws.
To remove the door panel on a 2001 Honda Civic loosen all of the mounting screws. Pull the panel back gently to remove the rest of the clips without breaking them.
The door panel on a 2002 Honda Civic is held on by several mounting screws and clips. Remove the mounting screws first, then pull the panel off. The remaining clips will just pop off.
How do you remove the driver side door panel of a 1998 VW Beetle to replace the door handle cable?
Using the correct sized screw driver, remove the screws and remove the clips that are in the door panel. Pull the panel away from the frame slowly, remove any wire connectors and then remove the panel from the frame.