use the special tool for that
Remove the wiring harness from your 2000 Kia headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.
With a wrench!!
remove fuel tank after draining. remove all lines hoses and wires from top of tank. remove fuel pump assembly by turning large plactic nut counterclockwise. disconnect wires inside pump assembly. slide senor and float from fuel pump assembly.
Open tailgate, remove two small torx screws in side, pull tail light assembly from mounting, screw lamp from assembly and replace defective bulb. Reverse proceedure, voila.
You need to remove the ac compressor, alternator, and their mounting bracket.
Not possible. You have to remove the whole light assembly.
lift up hood, on top of headlight assembly there are 2 tabs to pull up, then pull assembly out...
to remove the spindle and four bolts hold the bearing assembly to the "A" frame. remove the wheel, remove the control arm, remove the lower "A" frame , and remove the CV axle. then you will have acess to the 4 bolts that hold the bearing assembly. you will have to buy the whole assembly.
You will have to replace the complete window regulator assembly.
The engine and trans are removed as an assembly out of the bottom.
remove wheel. remove brake caliper assembly(not the brake hose) and pull off the rotor.
how do you remove a toyota sienna 2000 windshield water reservoir tank.