Want this question answered?
2.88lbs
On my 06 I just removed the two nuts & bolts on each side & slid it out.
You have to remove the exhaust manifold to get to the starter.
top of bell housing on passenger side . remove inner plastic fender for easy access
There are seven steps on how to remove a fender from a 95 Dodge Ram 1500. Some of the step-by-step instructions are remove the screws that hold the wheel well to the fender, remove the bolts from the wheel well fender, and then remove the bolts that attach the fender to the rocker panel flange.
Remove the front exhaust manifold and remove it from the top.
first would be to remove the headlight and turn signal. remove any bolts behind there holding the fender. remove the screws holding the inner fender to the fender. at the bottom of the fender behind the tire there are 1-2 bolts that need to be removed. now open the door and remove the fender bolt/s in the door jamb. last is to remove the 4-5 bolts along the top of the fender under the hood holding the fender to the appron.
I looked at my remote filter on my 93 S10 Blazer and it is bolted to the inner fender which shouldn't need to be removed to remove the fender.
Unbolt and remove everything bolted to the inner fender. Starting behind the headlight assembly, remove most of the bolts all of the way around the fender. With one or two helpers, hold the fender on while removing the remaining bolts, then the fender can be lifted off.
You pry it out.
There are many... Ibanez, Rickenbacker, Yamaha, Gibson, Washburn, BC Rich, Steinberger, to name a few, but there are guitars made to look similar to the classic fender stratocaster like the Yamaha Pacifica, the Squire (made by Fender) and the Torch Vintage.
how do i remove the front fender to 1996 Oldsmobile cutlas supreme.