the folding tray OS bolted to the passenger seat. the passenger seat must be removed in order to unbolt the tray from the seat.
Do not remove the passenger seat. remove the cover that attached to metal bracket of p. seat. it's mounted with two plastic screws. use flat screw driver to remove. then you will see 3 bolts on the bracket attached to p. seat. remove bolts and pull away.
Remove the ash tray
The tray bolts to the driver's seat. While the Tray is up, pop off the plastic part on the Driver seat that covers the covers up where the tray arm mounts to the driver's seat. Unbolt the two bolts securing the tray arm to the seat. Remove the tray, replace bols and cover.
You can log on to the website www.officedepot.com or you may also visit www.houzz.com where you can purchase the folding tray table with low prices and varieties to choose from
Behind the ash tray, just remove it, it should come off
Here's the Utility Tray removal process: Pull the tray out as far as it will go. On the left and right side of the tray (between the tray and the enclosure) there are two projecting rails that the tray slides on. Beneath each rail there is a white nylon pad (at the back of the tray) that comes to rest against a projecting piece of black plastic (a "stop") that prevents the tray from sliding completely out. With GENTLE pressure pulling on the tray, slide a narrow flat blade screwdriver between the black "stop" and the tray. Rest the blade of the screwdriver against the white nylon pad and GENTLY push the stop away from the tray until the white nylon pad slides just past the projection. You will have to allow the screwdriver to move with the tray. Continue to GENTLY hold the tray open so the nylon pad does not slip back behind the stop and repeat the process on the other side of the tray. You will need good lighting and will probably have to remove the console to have access and see what you are doing. To replace the tray, first remove the obstructions from the enclosure, and then align the slide rails with the receiving slots on the enclosure; gently pushing the tray back into poisiton. Remember, anything 1/2 thick or less can slide over the back of the tray and into the tray enclosure, so don't overload the tray. Good luck and thanks to Honda for making this an unnecessarily complex process - east to install but difficult to remove for service. Hopefully they redisigned the tray so things can't slip over the back or sides. It took longeer to type this than to remove the tray.
There are many places one might go to purchase folding tray tables. In addition to an official brand website, one might also try purchasing from the Amazon website.
You can find TV tray tables for sale from stores such as Target and Walmart. You can also find them available online from major retailers such as Amazon.
remove the cup holder and ashtray assemly ther are two small screws facing upwards remove them and it will come out There're more! Unplug the light of the trash tray, remove tray. Loosen two upward BOLTs at the back. Draw the stereo partially, then fully remove the bolts with hand. Afterwards, remove the stereo.
Take out the ash tray and unscrew the screw back there that holds the kit in place.
Under the radio. Behind the ash tray. Remove the ash tray, remove a plastic enclosure, and you will see the fuses
Open the locked door on the tank in front of you. Remove the plastic tray, and there it is. Remove the wing nut, slide the filter cover to the right side then tilt it up towards you. Remove the air filter, and replace with a new one.
It is under the ash tray in the center console. Just remove the tray and you will see it..............