Pull the lid up and squeeze the plastic hinges and they pop out of their holes. Very simple to replace and relatively cheap on EBay. good luck
To remove the armrest in a 2002 Dodge Caravan, locate the bolts holding it in place. Remove the bolts and carefully life the armrest off the seat.
Remove the screws in the wheel wells and underneath the plastic cover to remove the bumper cover. Then you can see to remove the actual bumper.
No, just the bolts that go tru the pan to the cover.
how to remove front bumper 2002 Impala
On a 2002 Ford Explorer : Check the center console , in front of the armrest ( for the 12 volt auxiliary power point )
The camshaft position sensor on your 2002 automobile is located on the front of the camshaft. You will need to remove the front engine cover to access the sensor.
front or rear? the front is slightly higher and rear of the drain... the back has a cover you remove to drain the fluid and a fill on the front of the diff..
Remove overhead light cover. Remove 2 screws and unit will drop down and hang on front part. Watch screws and don't drop and lose.
assuming its a V6... You have to remove the air intake manifold in order to get to the back three plugs. The front three you simply remove plastic cover and remove.
To remove the cover box to get to the fuel injector on the 2002 Envoy, first remove the intake manifold and the valve cover. You can do this by loosening the four bolts that hold the intake manifold first.Ê
how do you remove the rear struts/shocks on 2002 hyundai sonata.
How do you remove the driver door panel on a 2002 Cadillac deville?