to remove front rotors you need to remove wheel. then remove 4x4 locking hub.remove brake caliper. next you need a special socket to fit the axle nut.remove this and the outer bearing.then slide rotor off axle making sure not to drop inner bearing.
remove the brake caliper and the rotors come right off
Jack up and safely support front of vehicle. Remove front wheels. Remove front brake calipers and hang them with wire so not to damage brake hoses. Remove brake caliper brackets. Remove brake rotors. Rotors may need a little persuasion with a large hammer as they may be stuck/rusted in place. Reverse order to install rotors.
how do i remove the brake rotors for a 2003 Toyota tacoma v6 2wd
You will need to remove the front tire and wheels from your 2002 Jeep liberty. Remove the brake pads and break assembly. Tap the rotors with a hammer or mallet. The rotors will come off. Reverse the process to install the new rotors.
how to remove front rotors on 2003 Nissan fronter 4 wheel drive pick up
You will need to remove the tire and wheel. You can remove the brake pad and break assembly, by removing the brake spring and caliper. Loosen the rotors with a hammer. The rotors will slide off. Reverse the process to install the new rotors.
How do I remove the front rotors so I can replace the CV joints? .... After removing the brake pads and caliper assembly, of course.
You remove the wheels, remove the brake caliper and the rotor is then free .
Jack the front end up of your 1994 Ford F2 50. Remove the tire and wheel. Remove the brake pads and assembly. Tap on the rotors until they are loose. The rotors will slide off. Reverse the process to install the new rotors.
Remove the tire and wheel from your 1994 Chevy. Remove the brake assembly. Tap on the rotors with a hammer or mallet. The rotors will slide off. Reverse the process to install the new rotors.
You will find that the front brake rotors are located behind the front of your wheel spindle, (behind your wheel and brakes). There you will see the rotors.
there are two bolts that hold brake calipers to a u shaped bracket, remove them and then remove the two bolts holding the u shaped bracket. The rotors will come off at this point.