To change the front speakers, you will have to remove the door panels to expose the speakers. Once exposed, unhook them by disconnecting all the wires.
You have to remove the door panels
Remove speaker grill covers on dash to expose tweeters then remove door panels and you will se the rest of speakers
Remove the door panels and unscrew the grills, then unscrew the speakers
Remove the dash pad, then remove the speakers from the dash frame. For the rear speakers, open the trunk and remove the brackets, that hold the speakers in place. not for the back speakers ..you have to remove the lower rear seat then remove the seat belts then the rear seat back then remove the header panels in the back seat then remove the deck cover ..the rear speakers are bolted in from the top down under the rear deck cover....and the front speakers i believe are mounted in the door panels in the front doors ..you have to remove the door panels to remove them .some do have them in the dash also if they are there u do as the person stated before me.
One in each door have to remove door panels for access & 2 0n deck lid in trunk get acces to trunk for these speskers.
If your talking about the door speakers then you will have to remove the door panels to get to the speakers.
Remove door panels.. Unscrew old speakers..Screw in new speakers..replace door panels...ready 2 GO..
To replace the front speakers in a Toyota Sienna the door panels must first be removed. With the door panels removed the speakers will be easily accessible and the mounting screws can be loosen. Unplug the speakers and remove them. Install the new speakers.
1.- remove the doors panels 2.- remove the old factory speakers
remove the door panels
Begin by removing the cover from your rear speakers. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the speaker. The rear speakers will come out.
You don't need to remove front door panels, the speaker grills come out.
the rear speakers are located in the back doors. you have to remove the door panels to get at them.
depending on which you are trying to change i know the rear seat needs to be removed to access the rear speakers. there is no other way to remove the rear dash and or grilles
See the answer for the 93 model if you're referring to the rear ones. If you want to replace the front ones, you have to remove the door panels.
remove a couple screws and carefully lift up and then out with it.
First you want to remove your back seat by grasping it firmly and pulling up. Then you want to take off your interior trim panels. Now you will remove your rear deck which will expose your speakers. When I replaced mine I dropped four bolts down into the holes and put my new speakers in through the trunk. This would save you much more time if you ever need to replace them again.
You need to remove the rear seat to access the speakers and remove the covers.
Remove the door panels
You will need to remove the inner panels to gain access.
first, take the door panels off. next, there are four screws you have to remove. after that the speakers can be removed from the door, do not forget to disconnect the wiring harness from the speaker.
You have to go in from the trunk and work upside down.
After you open the back hatch, you notice two compartments, one on each side of the hatch area, remove the panels to gain access to the bulbs.