REMOVAL
1 - FUEL FILL DOOR
2 - HOUSING TABS
Remove the fuel cap.
Remove the three screws connecting the fuel door/housing to the filler neck.
Reach in through the opening and depress the tabs (2) at the upper and bottom right of the door/housing.
Remove the fuel door/housing from the vehicle.
You will need to remove the fuel tank.You will need to remove the fuel tank.
The fuel filter on a gas engine Jeep Liberty is inside the fuel tank, part of the pump.
The only way to gain access to the inside of the fuel tank would be to remove the tank from the vehicle then remove the fuel pump/sending unit assembly from the top of the tank.
The fuel filter is located under the rear of a 2006 Jeep Liberty. The filter is located between the rear tire and the fuel tank.
the 2004 Jeep liberty holds 19.5 gallons (73.8 Liters) ----
The fuel pressure of a 2003 Jeep Liberty Sport depends on the usage of the car. It can also depend on the elevation.
Inside the fuel tank
There wasn't a Jeep Liberty in 1997. Also, the Libertys are not made to run on E85.
Jeep does not use inertia/reset switches.
Jeep does not use inertia/reset switches.
The fuel filter is part of the pump module in the fuel tank.
Jeep does not use inertia/reset switches.The fuel system is computer controlled with relays.