There is a riveted triangular, black metal plate under the bed, on top of the trans. Linkage travels through it. All you do is drill out the rivets; 1/4" bit, loosen the nut on top of the shaft that goes down in to the case, and rotate the shaft counter-clockwise before re-tightening the nut. Be careful not to over adjust because you can over rev the motor and cause damage. adjust in increments and test drive to achieve a small, satisfactory result. You do not want to go over 35-40 mph or 4000 rpm or so. This can be checked using a portable gps unit. Also, if your mule is still under warranty, this will void it! So perform at your own risk.
Good luck and enjoy your new, faster mule 610.
I have a 2007 Mule 4x4 610 and the oil capacity is 1.5 U.S. quarts. (1.4 L.)
4x4 on kawasaki 650 vnot working
10w40 is what the book says. 1.9 quarts, napa filter# 1394 and that can be crossed to most other brands
what is the fuel pressure in a kawasaki prairie 700 4X4
To install drive belt on a 1999 Kawasaki Prairie 400 4x4, access the engine area and remove the cover that holds the clutch. Remove the drive belt around the clutch at the right side of the engine. Replace with new.
http://www.kawasakimotorcycle.org/forum/kawasaki-atv-mule/99111-bayou-300-4x4-new-problem-2.html This is for 86 - 04 maybe it will help you. copy and paste it in your browser and then scroll down about half way.
where is the fuse box on a 1999 kawasaki bayou 400
the little mule
The Little Mule
To remove a starter on a Polaris Sportsman 400 one must either decide first whether they understands well enough to do the task on their own or if a mechanic should be called. Many times people who don't really know what they're doing wind up having left over parts from a vehicle when there should be none other than the replaced part.
The Kawasaki Prairie 360 4x4 has 15.7 kw/ or about 21 hp. I wish I had one
THATS ME