No such part to remove on a PT.
No such part to remove on a PT.
No such part to remove on a PT.
The crankshaft position sensor on the PT Cruiser is on the side of the engine above the oil filter. The sensor is removed with two screws. Unplug the wiring, remove the bolts, then install the new sensor.
the crank shaft sensor on 06 pt cruiser is located underneath the starter. It's a very tight spot, to remove you need a 8mm socket and you have to unplug the sensor once is out...Don't foget to disconet the battery.
In the engine control module.
No, the crank sensor tone ring is different. It will not start.
Replace both of them.
The oil pressure sending unit on a PT cruiser can be found on the upper front cover of the engine. Remove the retaining nut and the sensor will come out. Reverse the process to install the new sending unit.
It is possible but not likely.
It does not have a bank two.
It is a speed sensor code.
It is on the inside of the valve stem.
The external air temperature sensor on a Chrysler PT Cruiser is located in the front of the motor. It is in the air intake tube that goes from the air cleaner to the motor.
On a 2004 PT Cruiser it is just ahead of the air filter. Remove the air filter cover to service the battery.