Hand brake? I thought the last GMC with a hand brake was in 68, but I could be wrong.
How do you remove handbrake cable from brake caliper 3litre signum right hand side
Buy a new cable from the lever to the linkage under the truck near the rear. Remove the old cable and feed the new in through the fire wall. Remove the lever and reinsert the swaged end in the lever.
how do you fix a vauxhall astra hand break cable
Remove plastic cover on handbrake lever. You will find an adjustment nut plus a locknut on each cable, as there is a separate cable for each side of the car. Adjust as necessary.
change hand brake cable citreon relay
Electronic brake. Like the hand brake which has a physical cable that you pull tight, the e-brake locks the rear wheels.
If your hand brake doesn't work you may just need new brakes in the rear, but in some cases the hand brake cable may have stretched and need some adjustment. To adjust the hand brake cable tention you must remove the 1" by 1/2" cover located on the driver side right next the the handbreak. You will find a hex nut that controls the tention which has a socket size of 12mm. Turn nut to the right until desired tention on handle.
HOLD Foot Brake on and pull hand brake on and off 5 or 6 times there is also a cable adjuster under centre console remove box at rear to get to it you may need to service calipers if brake wont adjust hand brake works off front brakes not rear
change hand brake cable citreon relay
first u need to get uder the car and check to see if the cable is broken loose fromcams on rear wheels then jack up rear of car and remove wheel and drum and check if adjuster wheel locked up if not cable may be broken and it can be easliy replaced wih simple hand tools but you can chek cable by having someone hold handle and you remove cable from one side and hold on to it and pull it back and forth to see
about 15-25 GBp :)
You probably have a frozen brake cable, not much you can do with that other than replacing it with a new one.