you don't. you remove the air intake assembly from the airbox back. Then you remove the intake manifold, leaving the throttlebody attached to it. Then you should be able to pullit outof your way far enough to get to the spark plugs.
Doble click in header area then on Design tab click on arrow below Header to expand list and choose Remove Header.
The dealer said that you have to remove the front bumper in order to even get at the bulb to change it!
The horn on a 1997 Hyundai is found mounted on the bumper of the vehicle. Remove the bolts that hold the horn down. Unplug the wiring and replace the horn.
Remove old one and fit new one in it's place.
you have to remove the screw on cover from back of head light houseing remove retainer clip unplug wires from headligt take bulb out. I find it easer to remove the whole houseing from the car because if you do it the way Hyundai wants you have to remove the battery from the car
how do you remove the rear struts/shocks on 2002 hyundai sonata.
Remove the heater control switch decorative cover. Remove the retaining screws. Remove the wiring harness. Reverse the process to install the new switch.
remove three bolts on the top of the rocker cover dust cover then remove plugs in the usual manner
Same way as the front. First remove the calipers, then remove the two cross-point screws that hold the caliper in place . finally, remove the rotors and replace.
There is No need to remove the tank, Just remove the rear seats and then remove the access panel to get to the pump and filter. http://www.elantraxd.com/forums/showthread.php?t=17699
It is pretty close but I think if you remove the exhaust header you should have roon to do it. Good luck
ask your local hyundai dealer of coures. or mabee ...