there is one 10mm bolt that needs taken out toward the top, then it slides away from the center of tha car.
Remove the wiring harness from your 2000 Kia headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.
The headlight assembly on a 2000 Acura Integra is held on using bracket bolts. Prop the hood open and locate the headlights. Unbolt the brackets and remove them. Carefully pry the headlight assembly out to not harm the weatherstripping.
Not possible. You have to remove the whole light assembly.
you dont..they are set in a harness in the back of the headlight assembly which is locked in place..you turn it to unlock it and remove it.
Open the hood of the engine compartment. Remove the wiring harness from the headlight. Remove the retaining bolts from the headlight assembly. The headlight unit will come out. Reverse the process to install the new headlight.
remove wheel. remove brake caliper assembly(not the brake hose) and pull off the rotor.
How to remove the headlight assembly # Disconnect negative battery cable # Remove the headlight bulb # Remove the radiator grille # Remove the parklight housing # Remove the retaining nuts and bolts and detach the housing and withdraw it from the vehicle
Hi, You have to remove the entire headlight assembly to get to the bulb, which is located in the back of the assembly. There are three wing nuts that hold the assembly in, and those will have to be removed. Then remove the side signal assembly first, then the headlight assembly. I have provided a link that shows exactly how this is done and where these wing nuts are. Good Luck
lift up hood, on top of headlight assembly there are 2 tabs to pull up, then pull assembly out...
The manual sales "go to a licenses Infiniti service provider."
Remove the entire head lamp assembly
Open the hood, remove the two tabs that lock the headlight assembly in place, remove the headlight assembly, doing this will give you access to the signal light socket for bulb replacement.