Want this question answered?
in the lower unit
pwd 40
remove the plug ! empty oil ! put on it side and fill it slowwwly to let air come out
it pulls out.
How do I remove the lower unit from my 1984 50 hp. Mercury outboard motor?
how do u remove the lower uint on an outboard motor? Depends on the outboard. Some Johnson/Evinrudes required that the powerhead (engine) be removed first for example. Look for a service manual for your particular motor on ebay, and it will tell you all you need to know to avoid problems.
The water pump is inbetween the lower unit and the motor . Remove the lower unit with 6 bolts and u will see it.
you will need to remove fuel tank. disconnect all fuel lines, discpnnect filler tube, disconnect electrical pigtail. note you probably have to lower but not remove fuel tank to access and disconnect above. may need to lower exhaust. remove lock ring from fuel sending unit. sending unit contains fuel pump. follow directions in fuel pump box.
does the lower unit need to be removed to replace the water pump on a 1995 Johnson 115 hp outboard engine
Never mind I figured it out
remove the lower part of the back seat. it should just pull up. look under the sound insolator mat. pass side you should see a wire harness, remove the 4 screws and the plate. it should be in with the fuel pump sump unit. remove the lower part of the back seat. it should just pull up. look under the sound insolator mat. pass side you should see a wire harness, remove the 4 screws and the plate. it should be in with the fuel pump sump unit.
1 qt, just filled mine