Use a small screw driver to pry the tiny pin that holds it in place with the shaft. The pin looks like a paperclip and is wraped around the cylinder of the handle.
how do you remove a car handle window for a 1995 lincoln car?
Remove door panel for access and investigation
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
To replace the window crank handle on the 1993 Geo Prism, first remove the interior door panel. Then, access the screw that holds the window crank in place and remove it. You can then remove the handle itself.
I know. I drive a 79 van Use to be there is a keeper pin on the handle that you have to pull out with a gemclip. See if you can push back the door panel back enoughto see the handle and the clip and remove the retainer witn the gem clip.
Yes.
The drive gear is broken in the window motor. Remove motor and install gear kit.
If the window is stuck in the down position on a Chevy Silverado, the door panel will have to come off to access the cable mechanism and fix the window. If the windows are electric, there will also be the wiring assembly for the window to remove.
You will need to remove the inside door panel. Remove the door handle retaining screws. Remove the linkage from the back of the door handle.
Assuming its not a power window...and you wnat to remove the cranking handle... Possibility: look behind the handle for a U-shaped spring clip that fits into slots on the handle "sleeve". This clip will have two small tangs that can be levered to push it back out of the slots in the handle.
there is a small clip between the handle and door panel that u have to remove it is easy if u have a small pick to hook it with then to install just place clip on handle and push on the window regulator shaft.
How to Remove or Install Car Window Crank Handles check related link below