need instrution for removing the oil pump from f150 v8 1997 4.6 truck
Yes, you can replace the oil pump in a 1978 F150 with 351 Winsor without lifting the motor. To replace the oil pump you will need the proper tools and supplies.
the fan and assembly are screwed on the pump. how do you remove
You will need to unbolt the motor and transmission from their mounts. jack up the motor, drain and remove the lower oil pan. That should give you access to the pump. If your going to do it you might want to change your main barrings at the same time.
Remove fuel tank
Disconnect fuel lines Remove 2 mounting bolts Slide pump off cam
Fuel pump relay is stuck. Replace it.
you have to remove the motor mount and power steering pump
Behind the power steering pump on the passenger side.The pump will have to be removed in order to remove the blower motor.
where is the fuel pump rely on a 2005 f150 with a 5.4
passanger side of motor remove the alternator first then three bolts will need to be romoved from the water pump
the water pump on that motor is ran by the timing chain it is in the front of the motor under a black cover that is held on by 4 bolts and you have to remove a cover like that on the back side of the motor on the front and remove t chain tensionor and turn the motor backwards alittle and then remove the 3 bolts that hold water pump in and the you need to install 2 bolts that screw into the water pump and pulls it out.this is not a real easy job to do for a do it your selfer if you mess it up you could have to remove the whole font cover of the motor to retime it.
Remove the wiring harness from the back of your 1993 Mercury Villager windshield washer motor pump. Remove the windshield washer pump hoses. Remove the windshield washer pump retaining bolts. Reverse the process to install your new windshield washer motor pump.