There are 8 Bolts along the frame rail (short bed truck) that hold the bed in place. 4 in front of the wheel wells (2 each side) and 4 behind. The fuel fill neck is held to the bed by 3 small bolts behind the fuel filler door in the side of the bed. I believe they are 5.5mm heads. The tail light harness plugs into one central junction box on the drivers side toward the very back of the bed. Get the main bolts, the filler neck bolts, and the light harness and you should be good to pull it off. There is SOMETIMES a silver colored ground strap on the drivers side in front of the wheel well. If there is be sure to unbolt it as well.
It is usually between 9-13 PSI.
you take it off, by taking it off how do you remove window hardware from panel?
2008 GMC TRUCKS SIERRA 1500 PICKUP 4.3L 6-cylCAPACITIESEngine, with Wix Filter 57060.....4.6 quarts2008 GMC TRUCKS SIERRA 1500 - 2500 - 3500 PICKUP 4.8L-5.3L-6.0L 8-cylCAPACITIESEngine, with Wix Filter 57060.....6.0 quarts2008 GMC TRUCKS SIERRA 2500 - 3500 HD PICKUP 6.6L 8-cyl Engine Code 6 TurboDieselCAPACITIESEngine, with Wix Filter 57202....10.0 quartsHope This Helps.
A blown fuse. Or a connection problem within the instrument cluster
There is 2 of them and both of them are underneith the intake manifold. You will have to remove the intake to service the knock sensers.
R134
GM vehicles do not use inertia/reset switches.
undo the two 3/32 bolts running thru headlamp assemblies and remove headlamp assembly to access bulb
Inside the alternator
Location of knock sensor 1991 GM sierra 350 2500?
what size engine
Pay someone to do it.