Want this question answered?
Dealer? Salvage Yard?
Relay switch in door is bad, replace relay switch. Remove interior door panel and you will find relay switch.
You have to remove the inside panel, where the window crank is, or would be.
break it
Remove the interioer trim and you will find two nuts to remove and the whole window trim and all will come out as you break the seal of the black gooie stuff.
Just remove sidings from the door (inside), then remove all bolts you will see, i think 6 pcs. then you can easily figure it out how you will remove the motor from the door shell.
how to in stall a Quarter Window in a 98 Chevy blazer
This is not an easy job. You have to remove the trim pad first. TAke it to the auto trim shop.
The window winder is secured by a spring wire clip. Push the circular pad away from the winder handle and pull out the clip with a crochette hook or similar.
Do you mean the rear vent window?The sliding door,body side and quarter glass vent windows are done using same procedure.1.Remove upper trim moulding from around the glass. 2.Remove the screws holding llatch to glass.3. Separate glass from latch. 4. Remove nut covers and nuts holding glass hinge to window opening flange. 5. Separate glass from vehicle.
the window switch is bad
You can remove the panels from the doors of the 1997 Mitsubishi Colt 1.3 GLX by first removing the screws from the door handles. Then, pry the panel away from the frame using a flat tool like a chisel or a screwdriver.