First remove the four 10 MM bolts holding the trans cooler and drop it down. Support it by attaching one bolt to the lower hole on the cooler frame. This will keep the weight off the lines. This takes two min. and allows easy removal of the elect. lines. Then remove the four bolts on each bumper. The bolts are 13MM and 17MM. You will need a ratchet, sockets, extension and a 13MM open end wrench. If you remove the rear bumpers, you should replace the rear pan with one of the aftermarket ones otherwise you will have big holes staring at the people behind you. Go to prowleronline.com and check the vendors for a couple of options. Maybe you are removeing them to paint and reinstall. Look at this link for some options .. Mine is the 7th post down. http://www.prowleronline.com/ubb/Forum1/HTML/014949.html Hope this helps. You can find me at prowleronline.com as BradleyG.. If you have more questions, join the POA and ask away. Great people and happy to help fellow Prowler owners.
how to remove 2013 passat rear bumper
Remove rear bumper on 99 ford tarrus
how do you remove and replace rear bumper on an xtype jag
To remove the rear bumper on the 2005 Nissan Sentra, you will first need to remove the rear bumper cover by using a flat tool to pry the pins. Then, access the bolts holding the bumper to the frame of the vehicle and remove the nuts. The bumper will then lift off.
Removing the Rear Bumper of a Passat...
The 1992 Mercedes-Benz 300 rear bumper is held in place with eight retaining bolts. You can remove the rear bumper by removing the retaining bolts.
The 1994 Ford Explorer rear bumper is held in place with eight retaining bolts. Remove the retaining bolts and the rear bumper will come off.
The rear bumper is held in place with eight retaining bolts. Remove the retaining bolts and the rear bumper will come off. Reverse the process to install your new rear bumper.
The bolts are in the rear of the trunk.
The 2007 Santa Fe rear bumper is held in place by eight retaining bolts. Remove the retaining bolts and the bumper will come off.
The rear bumper on a Honda Civic is held on using several mounting screws. After remove each screw the bumper will be held on with mounting clips. The bumper can be gently pulled off.
unsnap rubber pad on top of bumper and remove and go from there .
Have a crunched driver side rear corner bumper. Looking for tips how to remove the skin. Thanks Dorel
To remove the rear bumper cover on a 1993 Ford Taurus wagon, the lights need to be disconnected in the rear. Once all electrical connections are disconnected in the rear, remove the taillights and the fuel filler overflow hose. Remove any nuts and bolts holding the bumper cover on. Using needle nose pliers, pop the push pins around the bumper cover upwards. Slowly pull on the bumper to remove it.
Check E-bay or google
Just use the "force" to remove It.
Behind / under the rear bumper there you will see 4 bolts on each side of the bumper. Have someone help you hold it while you remove the bolts. the installation is the reverse of removal.
The rear bumper of a 98 Chevy S10 can be removed by disconnecting the rear wiring harness and taking out the retaining bolts. The bumper can then be removed from the frame and pulled from the vehicle.
hi just bought a mazda 323f but need to remove damaged bumper how do i do it please
You must remove the bolts that connect the bumper to the frame from underneath the rear of the truck. Have someone hold the bumper so that it does not fall on you when you remove the bolts.
Check in acurazine
You first shut up and get a job
Front? Rear? What model/year?