There are two screws that must be removed first. One is behind the door handle and the other is at the bottom corner of the door panel on the side closest to the door. After removing both screws, simply pull up and then out. You will need to raise the door panel about an inch before pulling out. Next, reach behind the door pannels and disconnect the two electronic connections. One is a light and the other is the automatic door lock. After that carefully work the door around the door handle.
how to remove starter on 1996 chevrolet 2500 with 6.5 diesel engine
youtube.com has detailed video on this....
The 2003 Chevrolet Silverado-2500HD is 18 ft. 6.1 in. (222.1 in.) long.
Chain
Yes it will.
you take off the nuts and bolts
A switch bezel on the drivers inside door panel of a 2013 Chevrolet Silverado 1500, 2500, 3500 and a 2013 GMC Sierra 1500, 2500, 3500.
location of ecm 2002 Chevrolet 2500 truck
A Chevrolet 2500 can be bought directly from the Chevrolet company website. In addition, many dealers also carry the Chevrolet 2500. Also, classified sections on popular websites such as craigslist regularly sell cars.
Remove the tire and wheel from your 2003 GMC 2500 Sierra. Remove the end of the axle. Using a seal puller remove the axle seal. Reverse the process to install your new rear axle seal.
Remove the water hose from the top of your 1996 Chevrolet 2500 thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out and drop in the new thermostat.
Never mind answering the question. You need a 3/8 Allen to remove the calipers.