There are 2 clips about 12 inches in from each side - the trick is to push down real hard on the front of the seat while at the same time pushing/pulling the front of the seat forward (towards the front of the car).
Do one side at a time.
Once the front of the seat bottom is free, just tilt it up and towards the front.
Lay down and force the bottom of the seat backwards and slightly upwards with your arms or shoulders to force the seat from the retainers on two sides. When the front comes up - you can remove the seat.
Get in to the back of the car and push very hard on the seat cushion towards the trunk. While you are pushing hard, lift up on it and the cushion should pop out. From there, there will be two bolts holding the rear part of the seat in.
No 2011 Mercury Sable model , but there is a 2011 Ford Taurus
99% sure the Taurus radiator will be a perfect match to the Sable's.
No, a Generation 2 (1992-1995) Taurus/Sable Windshield will NOT fit a Generation 3 (1996-1999) Ford Taurus/Sable.
No they do not
how do I remove my air bag from my mercury sable
The Mercury Sable and the Ford Taurus will have DOC in printed on the engine if they are dual overhead cam engines. The symbol should be on the top of the engine.
How can remove the rear seat on a 1990 mercury sable
Yes, it is identical.
Yes.
Yes, it does.
The 2000 Ford Taurus body control module is located on the firewall in the engine compartment. The module will be on the passenger side, near the bottom, of the firewall.
Just one handles the job. See "Related Questions" below for more about Taurus/Sable fuel pumps