Under the rear seat.
To change the battery in the 2003 Cadillac Seville, you will need to first access the battery that is located under the rear passenger seat. Then remove the battery cables and remove the battery.
The battery to a 1999 Cadillac Seville SLS is underneath the backseat of the car. The car manual explains how to remove the rear seat and gain access to the battery. It is much easier then it sounds.
Under the rear seat next to the battery; there is a 10 amp fuse for the seat warmers.
It is under the rear seat which you have to remove to access the battery.
Remove rear seat and remove battery
remove your rear seat, battery is located under seat
fuse bock under the rear seat.
Its under the rear back seat, you need to remove the bottom portion of the rear seat to get to it.
Remove the rear seat buy pulling up on one side at a time. Underneathe is the battery, just take off the terminals and replace.
Two lug nuts on the rear seat in the trunk
remove passenger seat in 2003 cadillac cts
under back seat
move seat all the way fwd there will be two 16mm or 18mm bolts holding the track down easy to get to from the back seat, remove lift up and pull back
under rear seat cushion there are fuses you can remove pass side push on seat lift up cushion
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
there is none you have to take out the back seat
The Battery is under the rear seat in a 2007 Cadillac dts. Remove seat by pulling up the front of the seat till it unlatches. This must be done on both sides. Battery is on passenger side.
Should be a bolt at each corner of the seat
Just push back on the seat and lift.
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
unscrew the bolts and take the seat out
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
the seating capacity of Cadillac Seville models is 5 passengers. Two passengers can be accommodated in the front seats. Three passengers can ride safely in the back seat.