Want this question answered?
how to remove trans shifter cable ball socket from shifter ball
you will have to take the console out or at least the top piece of the console and then you will see the shifter is bolted to the floor.
Remove your center console. and then you will be able to see the whole module
there is a clip on the front of the shifter. pull this out and the outer part of the shifter will come off. next remove the center console. then you can get to the 4 bolts that hold the shifter in place.
remove the console, you should see some screws on the bottom of the boot, remove, replace boot, replace console
The 2002 Jaguar center console is held in place with six retaining bolts. Remove the retaining bolts and the shifter knob. The center console will lift upward.
carefully pry up on the boot around the shifter disconnect the wires then take the box out of the console and there under the box should be the bolts to remove the complete console
The 1995 Pontiac Grand Am center console is held in place with for retaining bolts. Remove the shifter knob. Remove the center console retaining bolts. The center console will come off.
The nylon bushing at the bottom of the shifter is worn out. remove console. put shifter in the neutral position, unbolt shifter from transmission. replace bushing, then reinstall. good luck...
The center console is held in place with for retaining bolts. The retaining bolts are underneath the carpet. Pull back the carpet and remove the bolts. You will also need to remove the shifter knob.
pry up on the bezel around the shifter then remove 2 screws under bezel. remove 2 screws above radio faceing down remove ash tray remove radio bezel. move bolth seats up on the side of the ctr console is 2 screws remove then remove 2 screws in front of the shifter that are now showing after radio bezel is removed.remove screws located in cup holder crank up e brake and slide console out
the whole thing or just the knob. the 5speed shifter or the 4wd shifter. sigh. whole thing. 5sp pull seats. pull center console. remove boots. remove 2 side screws on shifter base , twist , out.