Pop out the horn button, it will just pop out.
The horn mechanism is a plastic ring with a rubber and metal retainer for the horn button. Remove the screws (Three) and don't allow two things to happen: Loose the screws and springs, don't let the horn wire touch metal.
Remove the steering wheel retainer nut.
Mark the orientation of the wheel to centre shaft so you can re install the same.
Use your steering wheel puller with included bolts to pull wheel off shaft.
How to remove steering wheel on Chevy lumina 2000
How to remove steering wheel on a 2001 chevy tohoe
How to Remove the Steering wheel From a Chevy Blazer 2001
How do you remove the steering wheel on a 1998 Chevy astro van
To remove the steering wheel from your 1985 Chevy Celebrity: First remove the horn button. There should be a keeper at the tip of the steering shaft, remove it. Remove the nut that holds the wheel in place. Use a steering wheel puller to actually remove the steering wheel.
Remove the tire and wheel from your 2001 Chevy Impala. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing. Reverse the process to install the new front wheel bearing.
It can be hard to remove a steering wheel by hand on any vehicle. To remove it, there is a tool, steering wheel puller, that can be bought or rented from local auto shops. It will help remove the steering wheel.
take off center cover, remove large nut then use wheel puller to remove steering wheel
It probably needs steering fluid.
To remove the steering wheel in a 1988 Chevy Celebrity standard version: !. Remove the screws that hold the horn pad in place then remove it. Unplug the wire at the connector. 2, If it still has the safety clip remove it. 3, Use the appropriate wrench to remove the nut from the steering shaft. 4. Use a steering wheel puller to loosen then remove the steering wheel. Reverse the instructions to replace the steering wheel. Steering wheel retainer nut should be 30 ft. lbs. torque.
remove ceter cap on steering wheel to gain access to large nut romve nut then use a steering wheel puller assembly pull steerinr wheel off the shaft
Removing a standard steering wheel from a Chevy Cavalier requires taking off the lower steering column and horn button. The steering wheel is held on by mounting screws, after removed be sure to unplug the horn wire.