Its actually pretty easy. Fist use small screw driver and from the bottom center pry up the power window module or face plate if you do not have power windows. Once out unplug the power window switch module and set it off to the side. Note: You will nee to unlock the connector prior to unplugging. Remove screw holding top of bezel. Next remove control knobs for heat/ac, fan speed,and hot/cold by pulling each one straight out, you me need a pair of pliers for this just be careful not to mar up the knobs. Now to remove the bezel place you hand into the opening where the power window switches were and pull. Slide your fingers around the edges and make sure you pull as straight out as possible to prevent breaking any tabs. Once Bezel is removed you remove the 4 screws holding the radio in.
Yes.
No.
There is no such part on a Chrysler PT Cruiser.
You turn it counter clockwise.
No such part to remove on a PT.No such part to remove on a PT.
The automatic does not have a drain plug. You remove the pan to drain.
8 mm
No. If you only remove the filter about a half quart will come out.
No. Timing belt replacement is possible in vehicle.
one
= For example weight of 2005 Chrysler PT Cruiser 1.6 is 4123 lb (1870 kg). = {| ! colspan="2" | | |}
No, the crank sensor tone ring is different. It will not start.